A Little Nat Help Please
Posted: Mon Feb 24, 2014 8:04 am
I've finally got it working!
I've configured my static internal IP address. Now I want to have it work from the outside world of my WIFI.
I've configured my Router's PORT FORARDING rule on my Verizon ACTIONTEC Router. I added the following rule.
192.168.1.60
Destination Ports 81
TCP Any -> 81
UDP Any -> 81 All Broadband Devices Active
( Currently you can see my static ip is 192.168.1.60 )
Now I know I need to change the Arduino code to from 80 to 81 LINE WebServer webserver("",80)
My question is in the IPHONE App. What IP address do I use?
Is it the Router DHCP address? 173.xx.xx.xx
I know the DHCP address can change, so I read somewhere that I need to name it and somehow register the name with the current DHCP address. I'm not sure where? I plug the name into the code so the name will get resolved to the correct address right?
It is a neat app. My first Arduion project so everything is new. I used a KA05 IO/ shield and it seems to work fine for both my door status pins 2,3 and relay's 8,9 I got two DLINK camera's and that part is working great. I'll post some pic's when everything is working on the projects link.
Thanks for your help here...
I've configured my static internal IP address. Now I want to have it work from the outside world of my WIFI.
I've configured my Router's PORT FORARDING rule on my Verizon ACTIONTEC Router. I added the following rule.
192.168.1.60
Destination Ports 81
TCP Any -> 81
UDP Any -> 81 All Broadband Devices Active
( Currently you can see my static ip is 192.168.1.60 )
Now I know I need to change the Arduino code to from 80 to 81 LINE WebServer webserver("",80)
My question is in the IPHONE App. What IP address do I use?
Is it the Router DHCP address? 173.xx.xx.xx
I know the DHCP address can change, so I read somewhere that I need to name it and somehow register the name with the current DHCP address. I'm not sure where? I plug the name into the code so the name will get resolved to the correct address right?
It is a neat app. My first Arduion project so everything is new. I used a KA05 IO/ shield and it seems to work fine for both my door status pins 2,3 and relay's 8,9 I got two DLINK camera's and that part is working great. I'll post some pic's when everything is working on the projects link.
Thanks for your help here...